Dewatering Container

Bakers Waste Equipment Inc (BWE) designs and manufactures specialty containers which assist septic haulers and other wastewater treatment companies in their wet waste handling applications.

These containers accommodate the growing trends to reduce waste volumes on permitted land application sites by dewatering the solids. Dewatered solids can then be land applied or disposed of at a land fill

The containers include removable filter panel structures which provide easy access to the substructure for cleaning or refurbishment if required.

The internal filter panel structures are available in stainless steel, galvanized, or mild steel with chemical resistant protective coatings on the substructure.

[Show as slideshow]

Features Include:

Capacities in 15, 20, 30, and 40 cubic yard designs
“Rectangle” or “Bathtub” Container Designs
Heavy Duty Construction
Processing Rates from 15,000 to 25,000 Gallons Per Day
“Water Tight” Sealed Sludge Gate
Cable Lift or Hook Lift Capabilities
Easy to Clean Interiors and Filter Media
Eliminates the Need for Expensive Processing Equipment and Storage Areas
Faster Processing Rates Available on Larger Capacities Due to High Pressure, Gravity Filtration.
Internal Center Wall Provides Dual Compartments for More Efficient Filtration and Separation of Waste.
Containers come standard with permanent filter media on interior

Standard Specifications Include:

Understructure - 3″ channel on 16″ centers
Cross Members -2 gussets per cross member
Main Rails - 2″ x 6″ tubing 1/4″″ wall, with solid bull nose
Cable Hook - 1.5″ hook integrated and welded into substructure
Floor - 3/16″ steel plate
Ground Wheels - (4) 8″ dia. x 6″ long with grease fittings
Nose Roller Guides - (2) 4″ dia. x 6″ long with grease fittings
Sides, Front, Gate - 12 gauge steel
Top Rails - 4″ x 3″ x 11 ga wall tubing
Side Braces / Uprights - 3″ x 5″ channel on 38″ centers
Tarp Rods - 5/8″ Rods on side, front and door
Coatings - Z600 epoxy protective coating on interior, primer outside 2.0 mils + industrial enamel finish to 2.0 mils
Sealed “Water Tight” Gate w/ 3 ratchet closures
Hinges - adjustable gate hinges w/ ratchet
(2) 3” drain ports per side w/ caps and triangle guards
(2) 3” clean out ports – hook end / front panel
Roll Over Tarp w/ crank, ratchet ties, and bow
Z600 epoxy protective coating on interior surfaces
Steel filter structure w/ center wall on interior (removeable)
Interior filter structure available in plain steel, galvanized, and stainless steel
Permanent filter media on walls and floors (330 micron)