Open Top Roll-Off Containers Bakers Waste Equipment

Heavy pick-up hook and guide rollers with grease fittings.
Note: Tie down bar and front ladder

Roll-Off Container Dimensions	A LT	B W	C HT	WT
20-cu yd, open-top container	22'	8'	53"	4,350
25-cu yd, open-top container	22'	8'	57"	4,620
30-cu yd, open-top container	22'	8'	71"	4,950
40-cu yd, open-top container	22'	8'	95"	5,760
50-cu yd, open-top container	27'	8'	95"	8,200
60-cu yd, open-top container	34'	8'	95"	10,680
80-cu yd, open-top container	40'	8'	95"	12,600

Standard Specifications:

Understructure 3" channel 4.1# per foot on 16" center

Cross members 2 gussets per cross member

Main Rails 2" x 6" tubing 3/16" wall, with solid bull nose

Pull Hook 1 1/2" w x 5 1/2" h x 2 1/2" eye opening

Floor 3/16" steel plate

Wheels 8" dia. x 6" long with grease fitting

Guide Rollers 4" dia. x 6" long with recessed grease fitting

Sides and Front 12 ga (Rectangles) / 10 ga (Tubs)

Top Cap 4" x 3" x 11 ga wall tubing

Side Braces 4" x 5" channel on 38" centers

Hinges 2 heavy-duty hinges with grease fitting
and 3 hinges on (40 yd only)

Rear Door 3-point latch and safely chain (40 yd only)

Canvas Tie Down Each side, front and door

Paint Primer inside and outside 2.0 mils, Industrial

enamel finish to 2.0

Heavy Duty Spec's Upgrade to 1/4" floor, 10 gauge sides,

and 1/4" top and bottom rails